Product successfully added to your cart.

View Cart →
photo 41single tool brick brace home pagephoto 16photo 19photo 13photo 10photo 14photo 15photo 1photo 101photo 101photo 8about4IMG 1273IMG 1274

Brick Brace – Single Tool

5.00 out of 5
(1 customer review)

£19.00

Free UK Delivery!

Click on photographs to enlarge.

SKU: BBST. Category: .

THE AWARD WINNING BRICK BRACE SAFETY TOOL

The many different scenarios of masonry alterations require far more preparation than only using Acrow props fitted with Strongboy’s as they do not offer the correct fitting work space for every task without dangerously overloading the structure above.

We created the Brick Brace to provide further options, to counter act all of the hidden problems of eccentrically propping, to make alterations more controllable, safer and easier during the task and to ensure future generations are taught correctly.

GUARANTEED SAFER, SUPERIOR & EASIER MASONRY ALTERATIONS OR YOUR MONEY BACK!

Only £19.00 including full instructions, a correct procedure, the Brick Brace masonry weight awareness chart and 1st Class Royal Mail Delivery Anywhere Within the UK

To Brace masonry, the force required upon the safety tool is estimated at 700N, for a safety factor of x 3 the force required in the safety tool is 2.1kN.

A recommended torque of 40Nm produces a force of 3.28kN which is more than adequate even allowing for some fall off in force as the tool beds in. This torque is also readily achievable on site and was also used in the test via a ratchet spanner. It also provides a force well below that to crush the end faces of the brick. When bricks were removed from below there was no distress whatsoever, no visible movement or cracking which suggested that the calculations are very reasonable.

All existing propping methods rely on the unknown lateral strength of the masonry to work safely, the Brick Brace is the only method that strengthens and stabilises the masonry to prevent collapse.

BRICK BRACE BENEFITS

Simple to adapt to

Improves Masonry Alterations knowledge

Providing further temporary support options

Keyhole surgery for face brickwork

Full access to the task

Ensures future generations are taught safely & correctly

 Use at any height, high or low

 Stabilises lime & weak mortar masonry

Increases the variable lateral strength of masonry

No Lost or falling masonry

Fully tested in multiples

 Supports all of the masonry, even in lime mortars

Guaranteed superior finish to a task

Versatile & Lightweight

No voids/traps in scaffolds

Raises the standards set within temporary support works

Also use when propping for total control of a task

Increases a Strongboy’s variable & unknown S.W.L.

Protection against minor collapse in-between props

Re-instates a load point to safely reduce the weight of the load to prevent overloading Strongboy’s

Allows a prop to be manoeuvred safely during a task

Safely minimising the number of props required

Pays for itself within two applications

Reduced Repair time

Easy To Store/ Fits in a tool bag

Reduced carbon footprint

Designed & Manufactured in Great Britain.

Superior results and time saved

 GUARANTEED

Use a hammer drill with a 10mm masonry drill bit to remove the mortar from the required perpendicular joint. Insert the Brick Brace safety tool and engage fully to the angled plate. Tighten the centre screw with a 19mm socket spanner; the masonry is now reinforced and ready for safer alterations and superior results, guaranteed.

The award winning Brick Brace, our guidance and  masonry weight awareness charts address all the main causes of minor and major collapse.

The fully tested Brick Brace safety tool increases the unknown variable strength of lime & cement mortar masonry to 40Nm which through testing is proven to be strong and stable enough to prevent collapse.

The tongued prop attachment has falsely eased a difficult task due to thirty years of insufficient warnings & misleading instructions, increasing the risk of the user to overload a structure and suppressing the true level of knowledge required to carry out masonry alterations correctly.

EXAMPLE

Load-Point

Which masonry requires support?

A 45 degree angle upon half bonded block work, a 35 degree angle in a Stretcher bond and a 25 degree angle upon a Flemish or English bond, from both ends of the opening, carrying up through the bed and perp joints to the central perpendicular joint where both angles meet is the location of a load-point.

photo 14

 When an opening is made within an existing wall and a load point is intact, the triangle of brickwork above the opening is the only masonry that could collapse, therefore this is the only masonry that requires temporary support.


This small triangle of masonry is also what Strongboy’s were designed to support when fitted 900mm apart and used within the 215mm maximum eccentricity.

Upon larger openings within a typical two storey residential property and any of the 3 points of the triangle do not remain, this law changes and all of the weight of the storey height above will rest back over the length of the opening (including roof loads, when they apply) due to the masonry above not safely arching.

photo 15

This masonry can weigh up to 10 times more in most cases than just the smaller triangle and is why Strongboy’s are so easily overloaded upon wider openings.

Fit the Brick Brace to reinstate a load-point, as shown within the drawing below to safely reduce the weight of the load back to the small triangle of masonry and to minimise the amount of impeding Strongboy’s required without dangerously overloading the equipment.

photo 1

(Scenario C below, shows the Brick Brace Safety System being used within a lime mortar mix)

photo 2

The Brick Brace Safety tool, weight charts, correct procedures & proven strategies address all the main causes of minor and major collapse during masonry alterations.

Please view our masonry weight awareness chart for further guidance.

1 review for Brick Brace – Single Tool

  1. J Williams
    :

    Excellent product, simple and easy to use, saves time and hassle. Came with detailed instructions and excellent customer service if needed. Thanks.

    5 out of 5

Add a review

Related Products