The Brick Brace Safety System
3 Brick Brace safety tools, 3 safety hooks, 2 couplers, anchor bolts, full instructions, guidance & free delivery within the UK.
(Scaffold tube not included)
GUARANTEED SAFER, SUPERIOR & EASIER MASONRY ALTERATIONS OR YOUR MONEY BACK!
Anyone that uses the Brick Brace safety tool that does not benefit from its use we promise a full money back guarantee. We ensure every user has the information to tackle every task safely as we supply full instructions & a correct procedure with every order and also provide a further help-line so no assumptions of use need to be made.
We have studied temporary masonry support for many years and our fully patented method of strengthening masonry is the further preparation required for safer and superior results, GUARANTEED.
If you have any other questions, just ask our temporary support expert Anthony on his mobile; 07545 462463 .
We created the Brick Brace to provide further options, to counter act all of the hidden problems of eccentrically propping, to make alterations more controllable, safer and easier during the task and to ensure future generations are taught correctly.
The Brick Brace is the only method that strengthens masonry, to prevent collapse.
safety tools are fitted three bricks apart in a cement mortar mix, a maximum of two and a half bricks apart in a weak/ lime mortar mix and within every perpendicular joint upon Block work.
Openings of up to 2250mm in a cement mortar mix & 1800mm in a lime mortar mix at any height high or low.
BRICK BRACE BENEFITS
Simple to adapt to
Improves Masonry Alterations knowledge
Providing further temporary support options
Keyhole surgery for face brickwork
Full access to the task
Ensures future generations are taught safely & correctly
Use at any height, high or low
Stabilises lime & weak mortar masonry
Increases the variable lateral strength of masonry
No Lost or falling masonry
Fully tested in multiples
Supports all of the masonry, even in lime mortars
Guaranteed superior finish to a task
Versatile & Lightweight
Full access foe scaffolding with no voids or traps
Re-instates a load point to safely reduce the weight of the load
Pays for itself within two applications
Reduced Repair time
Easy To Store/ Fits in a tool bag
Reduced carbon footprint
Designed & Manufactured in Great Britain.
Superior results and time saved
RESEARCH, Click Here
Tel: 01895 546405
To Brace masonry, the force required upon the safety tools is estimated at 700N, for a safety factor of x 3 the force required in the safety tool is 2.1kN.
A recommended torque of 40Nm produces a force of 3.28kN which is more than adequate even allowing for some fall off in force as the tool beds in. This torque is also readily achievable on site and was also used in the test via a ratchet spanner. It also provides a force well below that to crush the end faces of the brick. When bricks were removed from below there was no distress whatsoever, no visible movement or cracking which suggested that the calculations are very reasonable.
Share the post "Brick Brace – Trial Set"